AJ
I definitely like the look of the Lazers on your bike but I notice you have a centrestand on yours - is there an extra bracket on the connecting pipe for the bumpstop on the stand?
Cheers
Robin
Akrapovic slipons on a 900?
Started by
twinrider
, Jan 02 2007 08:26 am
184 replies to this topic
#161
hallrob1
-
- Supporting Member(thanks)
-
- 1,112 posts
has been here 4ever
- Location:Edenbridge, Kent
- TDM model: 2009
Posted 08 February 2007 - 08:56 am
1999 Gilera Runner 125SP, 2002 Piaggio X9 250, 2004 Bandit 600, 2005 TDM 900, 2007 Honda CB1300S, 2008 Tiger 1050, 1996 Triumph Sprint 9002006 Tiger 955i, 2018 Triumph Tiger Sport, 2023 Triumph Tiger 900, XJR1300, 2011 (2009) TDM 900,
Farkles - Laser Duo Techs, MTC Stainless Exhausts, Laser Duo Techs, Power Commander and custom map, Tenere 1200 Handguards, Yamaha Heated Grips, MRA Vario screen, SW Motech Alurack, Givi and Hepco and Becker top boxes, Givi Engine bars, Garmin Zumo XT
#162
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 08 February 2007 - 09:44 am
QUOTE(hallrob1 @ Thu 8th Feb 2007, 09:41 AM) <{POST_SNAPBACK}>
AJ
I definitely like the look of the Lazers on your bike but I notice you have a centrestand on yours - is there an extra bracket on the connecting pipe for the bumpstop on the stand?
Cheers
Robin
I definitely like the look of the Lazers on your bike but I notice you have a centrestand on yours - is there an extra bracket on the connecting pipe for the bumpstop on the stand?
Cheers
Robin
Thanks!
A mechanic did the jobb for me and he didn't mention anything about any x-tra brackets on the connecting pipe. The only x-tra brackets in the package are those two needed to lower the cans to make it possible to use panniers.
As a matter of fact, I haven't thought about this before your brought it up...
If you want more info, take a look here (PDF file from Laser's web site).
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#163
Pict
-
- Member
-
- 6,257 posts
Keep on keepin' on
- Location:North Herts., UK
- TDM model: 2006
Posted 06 March 2007 - 10:19 pm
QUOTE(mr sat nav @ Mon 15th Jan 2007, 02:34 PM) <{POST_SNAPBACK}>
Hey, check out this link, sussed out a bit more about how to post vids etc! Worked 'from home' today, so was able to take the beast out for a couple of hours and had the opportunity to try another sound-bite video!
Let me know what you think and turn up the volume on your pc for this!!
http://tinyurl.com/y7o7zr
Let me know what you think and turn up the volume on your pc for this!!
http://tinyurl.com/y7o7zr
For comparison, I just came across Hattech (road legal) cans - web site has a TDM900 soundbite.
"It's a TDM, Jim, but not as we know it"
www.youtube.com/watch?v=RAHmEWim3to
Diamond black TDM 900A TRIKE, 2006 ABS model converted by Trike Design (Caerphilly, South Wales) prior to first registration in March 2007.
#164
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 07 March 2007 - 03:24 pm
QUOTE(Pict @ Tue 6th Mar 2007, 11:04 PM) <{POST_SNAPBACK}>
For comparison, I just came across Hattech (road legal) cans - web site has a TDM900 soundbite.
Hey!
The sound was not bad. Not bad at all!
And the looks...? Well, it looks good too. Seems like it's mounted to the bike with a bracket instead of this strap thingy around the can. That's nice!
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#165
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 08 April 2007 - 04:57 pm
Ok, here we go again...
Just wanted to show you how my bike looks with new Laser cans fitted...
Cool, huh?
Just wanted to show you how my bike looks with new Laser cans fitted...
Cool, huh?
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#166
Pict
-
- Member
-
- 6,257 posts
Keep on keepin' on
- Location:North Herts., UK
- TDM model: 2006
Posted 08 April 2007 - 05:44 pm
Yup - quality altogether 
"It's a TDM, Jim, but not as we know it"
www.youtube.com/watch?v=RAHmEWim3to
Diamond black TDM 900A TRIKE, 2006 ABS model converted by Trike Design (Caerphilly, South Wales) prior to first registration in March 2007.
#167
E-njoy
-
- Member
-
- 570 posts
Knight of Postsalot
- Location:Almere, Netherlands
- TDM model: 2006
Posted 10 April 2007 - 11:33 pm
To update this thread as well then, here a small clip of my superpoles with the db killers removed:
http://video.google....478306225602867
The sound is much louder than the clip suggests. It's a very nice sound, but it was way too loud for my liking (and that of my neigbours I'm sure).
http://video.google....478306225602867
The sound is much louder than the clip suggests. It's a very nice sound, but it was way too loud for my liking (and that of my neigbours I'm sure).
Emile
www.piloot.com
'80 Honda CB400T Hawk, '92 Yamaha XJ600S Diversion, '90 Honda PC800 Pacific Coast, '92 Honda ST1100ABSTCS Pan European, '00 BMW R1150GS ABS, '04 Yamaha XP500i T-max, '01 Triumph Sprint ST 955i, '06 Yamaha TDM900A GT, '02 Honda ST1300A Pan European
www.piloot.com
#168
Quartermaster
-
- Member
-
- 927 posts
900 going for ... 1000cc?
- Location:Bromsgrove, Worcestershire
- TDM model: 2008
Posted 11 April 2007 - 12:40 pm
QUOTE(E-njoy @ Wed 11th Apr 2007, 12:18 AM) <{POST_SNAPBACK}>
To update this thread as well then, here a small clip of my superpoles with the db killers removed:
http://video.google....478306225602867
The sound is much louder than the clip suggests. It's a very nice sound, but it was way too loud for my liking (and that of my neigbours I'm sure).
http://video.google....478306225602867
The sound is much louder than the clip suggests. It's a very nice sound, but it was way too loud for my liking (and that of my neigbours I'm sure).
With enough power to blow the camera over !
'73 Honda CB500 Four, Royal Enfield Interceptor 650 and Triumph Tiger Sport 660.
#169
twinrider
-
- Member
-
- 246 posts
Carpe groupie
- TDM model: 2005
Posted 29 July 2007 - 04:30 am
QUOTE(AJ_Blizzard @ Thu 8th Feb 2007, 10:29 AM) <{POST_SNAPBACK}>
Thanks!
A mechanic did the jobb for me and he didn't mention anything about any x-tra brackets on the connecting pipe. The only x-tra brackets in the package are those two needed to lower the cans to make it possible to use panniers.
As a matter of fact, I haven't thought about this before your brought it up...
If you want more info, take a look here (PDF file from Laser's web site).
A mechanic did the jobb for me and he didn't mention anything about any x-tra brackets on the connecting pipe. The only x-tra brackets in the package are those two needed to lower the cans to make it possible to use panniers.
As a matter of fact, I haven't thought about this before your brought it up...
If you want more info, take a look here (PDF file from Laser's web site).
AJ, I noticed that while your Laser pipes look like they're mounted at the same height as the stock cans, the Lasers pictured in the PDF look much higher. Do you know why there is a difference?
#170
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 29 July 2007 - 08:32 am
QUOTE(twinrider @ Sun 29th Jul 2007, 06:15 AM) <{POST_SNAPBACK}>
AJ, I noticed that while your Laser pipes look like they're mounted at the same height as the stock cans, the Lasers pictured in the PDF look much higher. Do you know why there is a difference?
Hi TwinRider,
The difference is with or without side cases/panniers; no room for panniers when pipes are mounted high (like the photo in the PDF file). There are two brackets are enclosed in the Laser package and by using them you can fit the cans low enough to use panniers. My bike looks like this with panniers:
Edited by AJ_Blizzard, 29 July 2007 - 08:34 am.
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#171
twinrider
-
- Member
-
- 246 posts
Carpe groupie
- TDM model: 2005
Posted 01 August 2007 - 04:21 pm
Thanks for the very helpful reply, AJ. How are your pipes holding up so far?
#172
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 01 August 2007 - 06:24 pm
QUOTE(twinrider @ Wed 1st Aug 2007, 06:06 PM) <{POST_SNAPBACK}>
Thanks for the very helpful reply, AJ. How are your pipes holding up so far?
They are holding up very good. Great sound - not too loud but loud enough to get some attention
I polish the pipes every now and then and to me they still look like new.
So far I'm a happy Laser customer!
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#173
twinrider
-
- Member
-
- 246 posts
Carpe groupie
- TDM model: 2005
Posted 02 August 2007 - 11:03 am
QUOTE(AJ_Blizzard @ Wed 1st Aug 2007, 07:09 PM) <{POST_SNAPBACK}>
They are holding up very good. Great sound - not too loud but loud enough to get some attention
I polish the pipes every now and then and to me they still look like new.
So far I'm a happy Laser customer!
I polish the pipes every now and then and to me they still look like new.
So far I'm a happy Laser customer!
Where'd you buy them from? I'm looking for a place with decent prices that is willing to do international shipping.
#174
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 02 August 2007 - 12:13 pm
QUOTE(twinrider @ Thu 2nd Aug 2007, 12:48 PM) <{POST_SNAPBACK}>
Where'd you buy them from? I'm looking for a place with decent prices that is willing to do international shipping.
I did the purchase through a Norwegian firm/retailer called MC-1 here in Norway. MC-1 doesn't have a web site, but you could try to get in touch with them on this address: yamaha@mc-1.com.
I'm not sure if they deal with non-Norwegian customers...
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#175
twinrider
-
- Member
-
- 246 posts
Carpe groupie
- TDM model: 2005
Posted 02 August 2007 - 01:27 pm
QUOTE(AJ_Blizzard @ Thu 2nd Aug 2007, 12:58 PM) <{POST_SNAPBACK}>
I did the purchase through a Norwegian firm/retailer called MC-1 here in Norway. MC-1 doesn't have a web site, but you could try to get in touch with them on this address: yamaha@mc-1.com.
I'm not sure if they deal with non-Norwegian customers...
I'm not sure if they deal with non-Norwegian customers...
Can you let me know what you paid so I can do some comparison shopping? Thanks again
#176
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 02 August 2007 - 05:21 pm
QUOTE(twinrider @ Thu 2nd Aug 2007, 03:12 PM) <{POST_SNAPBACK}>
Can you let me know what you paid so I can do some comparison shopping? Thanks again
Ok,
I paid £.530,63 (all included like taxes, postage & handling etc.)
More than NOK 3000,- (Norwegian Kroner) cheaper than what Laser is sold for by retailers here in Norway...
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#177
twinrider
-
- Member
-
- 246 posts
Carpe groupie
- TDM model: 2005
Posted 03 August 2007 - 01:16 am
QUOTE(AJ_Blizzard @ Thu 2nd Aug 2007, 06:06 PM) <{POST_SNAPBACK}>
Ok,
I paid £.530,63 (all included like taxes, postage & handling etc.)
More than NOK 3000,- (Norwegian Kroner) cheaper than what Laser is sold for by retailers here in Norway...
I paid £.530,63 (all included like taxes, postage & handling etc.)
More than NOK 3000,- (Norwegian Kroner) cheaper than what Laser is sold for by retailers here in Norway...
Thanks, I sent them a mail
#178
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 03 August 2007 - 07:57 am
QUOTE(twinrider @ Fri 3rd Aug 2007, 03:01 AM) <{POST_SNAPBACK}>
Thanks, I sent them a mail
Have you seen this YouTube video BTW...?: Laser Duo-Tech
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
#179
twinrider
-
- Member
-
- 246 posts
Carpe groupie
- TDM model: 2005
Posted 03 August 2007 - 12:36 pm
QUOTE(AJ_Blizzard @ Fri 3rd Aug 2007, 08:42 AM) <{POST_SNAPBACK}>
Have you seen this YouTube video BTW...?: Laser Duo-Tech
Will crank that clip when I get home from work
One seller in Germany who has an Ebay shop offered a set of stainless steel Duo-Techs for 486 euros, plus 52 euros to ship it to me. Did you pay 530 euros or pounds?
Btw, how's the quality of the stainless steel? Titanium can be had but it's 608 euros.
Edited by twinrider, 03 August 2007 - 02:49 pm.
#180
AJ_Blizzard
-
- Member
-
- 453 posts
Carpe junky
- Location:Norway
- TDM model: 2006
Posted 03 August 2007 - 08:08 pm
QUOTE(twinrider @ Fri 3rd Aug 2007, 02:21 PM) <{POST_SNAPBACK}>
Will crank that clip when I get home from work
One seller in Germany who has an Ebay shop offered a set of stainless steel Duo-Techs for 486 euros, plus 52 euros to ship it to me. Did you pay 530 euros or pounds?
Btw, how's the quality of the stainless steel? Titanium can be had but it's 608 euros.
One seller in Germany who has an Ebay shop offered a set of stainless steel Duo-Techs for 486 euros, plus 52 euros to ship it to me. Did you pay 530 euros or pounds?
Btw, how's the quality of the stainless steel? Titanium can be had but it's 608 euros.
The quality on mye Lasers seems to be excellent - stainless steel inox, I think it is...?
I paid £530.
TDM 900 2006 mod.:
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
MRA modded PUIG screen, air-box mod., Laser Duo-Tech cans, Powercommander, Symtec Motorcycle Grip Heater, Stebel Magnum (black), Centech AP-1 Auxiliary Fuse Panel, Hawkeoiler...
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
