Edited by wicklamulla, 22 December 2006 - 02:34 pm.

Vario Screen Winglet
#61
Posted 22 December 2006 - 02:34 pm
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#62
Posted 27 December 2006 - 04:09 pm
Vario touring screen, Stainless Steel Rad Guard,
Still in the shed:- BMW Hand Guards, Heated Grips, Aux Lamps.
#63
Posted 27 December 2006 - 07:06 pm
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#64
Posted 27 December 2006 - 11:06 pm
just got me oxford grips today for 29.99 at Heil Gerike and hopefully (weather dependant) will be fitting those tomorrow.


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I have a Ghost S and i'm not afraid to use it !
A Beast in Orange Called KaTie eM
"Four wheels move the body. Two wheels move the soul".
"So you just ride somewhere, eat cake and then ride back".
"Normal people believe that if it ain't broken, don't fix it. Engineers believe that if it ain't broken, it doesn't have enough features yet."
" I We're Ridin so Fast , I we're sucking Rabbits from the Hedges " {Guy Martin}
#65
Posted 27 December 2006 - 11:31 pm
#66
Posted 28 December 2006 - 08:52 am
No problem with the two adrresses.
Yours arrived as well Danceswithmopeds.
That's just three cheques left floating in the ether.
Edited by Andy K, 28 December 2006 - 08:56 am.
Vario touring screen, Stainless Steel Rad Guard,
Still in the shed:- BMW Hand Guards, Heated Grips, Aux Lamps.
#67
Posted 28 December 2006 - 10:28 am
Oops, and one of them is mine

Will try to getit in the post later on today!!
Fluteplayer
(\__/)
(='.'=)
(")0(")
This is Bunny. Copy and paste Bunny into your signature to help her gain world domination
#68
Posted 28 December 2006 - 12:00 pm

But not surprisingly no check, no wing.
Edited by Andy K, 28 December 2006 - 12:00 pm.
Vario touring screen, Stainless Steel Rad Guard,
Still in the shed:- BMW Hand Guards, Heated Grips, Aux Lamps.
#69
Posted 28 December 2006 - 12:20 pm

But not surprisingly no check, no wing.
Cheque is now in the post!!!
Sorry, completely forgot, wiv all the Xmas cheer

Fluteplayer
(\__/)
(='.'=)
(")0(")
This is Bunny. Copy and paste Bunny into your signature to help her gain world domination
#70
Posted 30 December 2006 - 09:03 am

Well padded package, proudly carrying a Carpe label - excellent stuff!

Here again are the fitting instructions for anyone who's lost them.
The German notes with the winglet don't seem to add much - my rough translation (Feel free to correct) goes like:
1 Place the winglet centrally and fix e.g. with adhesive tape.
2 Since the hinge mounts are angled, care must be taken to offset the position of the holes. It is advised to use the outer edges of the mounts to set the positions. In that way the offsets can be kept in line. See sketch below.
3 Check: the distance between the marked mounting points on either side should be 40 mm.
4 When drilling the holes, a wood bit (with central point) should be used. Drill the screen with little pressure.
Will scan notes and diagram - see later posting
Edited by Pict, 30 December 2006 - 10:39 am.
"It's a TDM, Jim, but not as we know it"
www.youtube.com/watch?v=RAHmEWim3to
Diamond black TDM 900A TRIKE, 2006 ABS model converted by Trike Design (Caerphilly, South Wales) prior to first registration in March 2007.
#71
Posted 30 December 2006 - 09:29 am
Cheers Pict
Do any one want a second hand brain (not good for much)! I had planned to include a copy of the instructions with each one. Durrr.
I will stick them in with the rest.
On that point do not worry if you have not received yours yet I posted Pict's first to check the postage, the rest will go out soon.
If anyone else wants one I have a couple of extras to hand, so don't be shy.
Vario touring screen, Stainless Steel Rad Guard,
Still in the shed:- BMW Hand Guards, Heated Grips, Aux Lamps.
#72
Posted 30 December 2006 - 09:52 am
ie The view is of one side from above or below (Confused me at first)

Edited by Pict, 30 December 2006 - 10:45 am.
"It's a TDM, Jim, but not as we know it"
www.youtube.com/watch?v=RAHmEWim3to
Diamond black TDM 900A TRIKE, 2006 ABS model converted by Trike Design (Caerphilly, South Wales) prior to first registration in March 2007.
#73
Posted 30 December 2006 - 10:51 am
I can not advise to strongly that you use as little pressure as possible and make sure that you have a sacrificial piece of wood pressed firmly to the back of the screen to prevent cracking as the drill bit emerges.
You may find you get a cleaner hole if you start off with a small pilot hole then drill the proper size only part way through before turning the screen over an finishing off from the other side.
Vario touring screen, Stainless Steel Rad Guard,
Still in the shed:- BMW Hand Guards, Heated Grips, Aux Lamps.
#74
Posted 30 December 2006 - 04:28 pm
I did wonder when i read that post


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I have a Ghost S and i'm not afraid to use it !
A Beast in Orange Called KaTie eM
"Four wheels move the body. Two wheels move the soul".
"So you just ride somewhere, eat cake and then ride back".
"Normal people believe that if it ain't broken, don't fix it. Engineers believe that if it ain't broken, it doesn't have enough features yet."
" I We're Ridin so Fast , I we're sucking Rabbits from the Hedges " {Guy Martin}
#75
Posted 02 January 2007 - 04:11 pm
I finally staggered down to the Post Office
- Pict Posted 02/01/07
- Wick Posted 02/01/07
- TDMTim Posted 02/01/07
- amarko5 Posted 02/01/07
- Danceswithmopeds Posted 02/01/07
- Kpnuts Posted 02/01/07
- Lerk Posted 02/01/07
- Techy-V Posted 04/01/07
- BwfcDave1 Posted 04/01/07
Edited by Andy K, 17 January 2007 - 09:01 am.
Vario touring screen, Stainless Steel Rad Guard,
Still in the shed:- BMW Hand Guards, Heated Grips, Aux Lamps.
#76
Posted 02 January 2007 - 06:19 pm
I finally staggered down to the Post Office
- Pict Posted
- Wick Posted
- TDMTim Posted
- amarko5 Posted
- Danceswithmopeds Posted
- Kpnuts Posted
- Lerk Posted
- Fluteplayer
- Techy-V
- BwfcDave1
he he he tanks alot Andy, yer sooooooooo polite and modest about it all, if twas me i'd be bitching like a ho and moaning about all the cello tape i was using !!!! tanks again, much appreciated.

spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#77
Posted 03 January 2007 - 09:05 pm
I finally staggered down to the Post Office
- Pict Posted
- Wick Posted
- TDMTim Posted
- amarko5 Posted
- Danceswithmopeds Posted
- Kpnuts Posted
- Lerk Posted
- Fluteplayer
- Techy-V
- BwfcDave1
Much apreciated.. screen arrived today. Thankyou very much for your hard work. Do they give out CARPE medals to those who serve well???
thanks again.. Now to review the best of screen combinations again.
#78
Posted 03 January 2007 - 09:07 pm
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#79
Posted 03 January 2007 - 09:17 pm
me too thanks Andy very well packaged and fast service

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I have a Ghost S and i'm not afraid to use it !
A Beast in Orange Called KaTie eM
"Four wheels move the body. Two wheels move the soul".
"So you just ride somewhere, eat cake and then ride back".
"Normal people believe that if it ain't broken, don't fix it. Engineers believe that if it ain't broken, it doesn't have enough features yet."
" I We're Ridin so Fast , I we're sucking Rabbits from the Hedges " {Guy Martin}
#80
Posted 03 January 2007 - 09:19 pm
Ach - ye're just menthol!


"It's a TDM, Jim, but not as we know it"
www.youtube.com/watch?v=RAHmEWim3to
Diamond black TDM 900A TRIKE, 2006 ABS model converted by Trike Design (Caerphilly, South Wales) prior to first registration in March 2007.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users