Knight of Postsalot
Posted 16 April 2017 - 06:45 pm
Yes, they are FUEL exhausts and has the bump stop bracket in the right position.
http://www.carpe-tdm...topic=34409&hl=
There is nothing like the smell of burned cow poo in the morning
Sorry! Senior moment - I'm getting different brands mixed up and didn't realise you'd answered that question on my thread. 
Carpe Addict
Posted 21 May 2017 - 02:15 pm
So, had my 9'er on the DYNO to get the PowerCommander mapped.
It took 6 hours and 188 miles (300 km) on the DYNO, to do a full mapping.
The result was 82 bhp @7000 rpm (rear wheel) and 84 Nm @6000 rpm. Top speed was 138 mph (220 km/h).
Now, the figures are good, but what really is fantastic is how smooooooth the power delivery is now 
It just pulls hard and smooth in all gears at all throttle openings. No more low speed jerkiness
The CO2 sensor and the secondary air induction system was disabled. No modifications to the air filter box. K&N air filter and FUEL exhausts with baffles fitted.
A short video: https://youtu.be/0_C5DnYVILM
*****************
Fitted clear indicator lenses.
****************
Fitted an MRA Vario screen.
Don't mind wind pressure, but with the original screen there was a lot of turbulence around the chest area at highway speeds. Hopefully the MRA screen removes all turbulence.
************
Removed the lower/full fairing. Didn't really like the look of it and it made cleaning the engine difficult.
Fitted a belly pan instead. Not sure that I like that either..... Decisions, decisions.... 
Edited by TDM4ever, 14 April 2019 - 09:36 am.
sticking around
Posted 25 May 2017 - 05:57 pm
has been here 4ever
Posted 26 May 2017 - 07:36 am
Can recommend a gel Seat from top selleri.
+1
really likes Carpe
Posted 31 May 2017 - 08:02 pm
supporter of the "Anti-Dazzle" Club
Posted 01 June 2017 - 05:07 am
Here's the Fenda Extenders on eBay
http://www.ebay.co.u...da 900&_sacat=0
...
...
...
...
Carpe Addict
Posted 01 June 2017 - 08:37 am
Hi.
Bike looks really good.
I have just bought a TDM, can you tell me where you got the front fenda extenda - and did it fit ok?
Clear lenses look neat - did they fit ok?
I am also fancying some Fuel Loudencers.
I'll have to get grafting.
Cheers and all the best
Got the fender extender here: https://www.pyramid-...900 Accessories
A little difficult to line up without the sticky pads grapping, but with patience/precision it is no big problem.
The lenses fits like the originals.
Edited by TDM4ever, 01 June 2017 - 08:38 am.
Monkey Boy
Posted 01 June 2017 - 01:39 pm
Carpe Addict
Posted 02 June 2017 - 07:06 am
And might be x!worth a screw/rivet to mud guard extend as a few have lost em with the sticky.
I can assure you that the one from Pyramid won't come off.. The amount of sticky pads on there is crazy and they really grip hard. There is no way I could pull it off without breaking something.. 
Carpe Addict
Posted 02 June 2017 - 07:35 am
has been here 4ever
Posted 02 June 2017 - 09:47 am
The Blue One : 2004 model owned 2010-2018 much loved, much missed and now living with a man in Scotland Spain.
The Black One : 2010 Model Registered 2013 owned 2018 - present .Beowulf Cans. Renthal 755s Grip Puppies,15w fork oil,DL650 handguards ,givi engine bars ,led spotlights,gipro gear indicator, shortened dogbones, LeeHenty CSM kit and stainless bits, Topsellerie seat,MRA Xcreen,.PC III (dynoed). K&N airfilter,Fenda extenda. Lots of stainless/titanium.
Carpe Addict
Posted 02 June 2017 - 10:22 am
yeah best to use tape then small pilot hole piece of cake hopefully 😅😅😅😅😅😎😣😣Be careful drilling the holes in the mudguard!
Monkey Boy
Posted 02 June 2017 - 05:25 pm
I dont need assuring but wicky might. :-)
I can assure you :
Carpe Citizen
Posted 02 June 2017 - 06:20 pm
Be careful drilling the holes in the mudguard!
+1 ...stop when the drill hits the tyre 
Ohlins, PC3, fuel cut defeat, +4deg timing, 17" front wheel.
supporter of the "Anti-Dazzle" Club
Posted 28 June 2017 - 10:34 pm
Gorgeous, get that shock spring painted black now
I'd put a Shock-Sock on it to protect it...
............
is it Jizzy Rascal time yet.....?
Posted 02 July 2017 - 01:55 pm
I dont need assuring but wicky might. :-)
yep mine had uber sticky pads on it but they eventually lost their stickiness and the fender extender fell off never to be found FFS. Drill the mudguard very carefully as I cracked it by being careless on anudder boike. Might have a go at making my own fender extender.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
Knight of Postsalot
Posted 03 September 2017 - 05:03 pm
8 gears wow! 
supporter of the "Anti-Dazzle" Club
Posted 03 September 2017 - 06:35 pm
8 gears wow!
I should really get one - the amount of times I try to find 7th 
............
0 members, 1 guests, 0 anonymous users
