I oredered one of these kits from them,http://www.ebay.co.u...=item53f5b97212 now if you read in the discription it says,(Each fairing kit contains all the fasteners required to replace the bikes original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone - where applicable (please note screen kits are sold separately). Simply remove one bolt/fastener at a time and replace with an identical length Pro-Bolt equivalent, using the bikes original backing clip (Appropriate nuts are also included if this is not possible). (now i was thinking i would get the side panel fairing bolts the bolts around the cockpit shroud and the front mudgaurd ones but all i got was 6 bolts enough to do the sidepanel fairing ones, E, mailed them about there advert and they say i have the correct kit for my bike am i missing something or they pulling a fast one with there advert.
Pro Bolt
#1
-
- Member
- 55 posts
enuff posts to fill a 50cc
- Location:South Hetton, County Durham.
- TDM model: 2001
Posted 28 February 2013 - 03:23 pm
#2
-
- Member
- 37 posts
sticking around
- Location:UK
- TDM model: 1993
Posted 28 February 2013 - 03:32 pm
report them to trading standards - the advert is very clear that you will be provided with all the bolts for all the panels. If you paid by paypal you can get your money back through them.
I've bought some stuff from them and its been ok but six bolts is having a laugh!
Rick
Edited by Rickystyx, 28 February 2013 - 05:23 pm.
TDM 850 1993 bought it on Valentines day - must have something to do with why I've fallen for it!
So glad I didn't buy that Pan Euro!
She's tidy, a head turner and a really nice ride but she does suffer from wind noise!
Must be a female!
#3
-
- Supporting Member(thanks)
-
- 3,252 posts
Gettin to be an 'Old Bugger'
- Location:Usually in a Hospital somewhere in the Birmingham area
- TDM model: 1993
Posted 28 February 2013 - 03:43 pm
Another smart arsed evilbay seller. 
For a challenging summer try the
Round Britain Rally.....
1993 TDM 850 Mk1 ..... 2008 TDM 900 .... 1975, 1979, 1982, 1992 Goldwings, Scott, AJS, Triumph 5TA
#4
-
- Member
-
- 242 posts
Carpe groupie
- Location:M41
- TDM model: 2008
Posted 28 February 2013 - 04:21 pm
I believe the company JJC Race and Rally is part of Demon Tweeks in Wrexan but caters for the cheaper end of the market. Worries me when their contact address is just a PO Box
I never ride faster than my angel can fly
#5
-
- Supporting Member(thanks)
-
- 1,098 posts
has been here 4ever
- Location:Edenbridge, Kent
- TDM model: 2009
Posted 28 February 2013 - 05:05 pm
I just had a K&N Oil filter delivered yesterday by them, no problem very cheap and free next day delivery - their Feedback is 99.9% but quite a few of the negative ones concern pro bolt. It sounds like the issue is with the Pro Bolt ad - that's exactly word for word on their website so it might be worth checking with them if you have every thing in your package that you should have.
1999 Gilera Runner 125SP, 2002 Piaggio X9 250, 2004 Bandit 600, 2005 TDM 900, 2007 Honda CB1300S, 2008 Tiger 1050, 1996 Triumph Sprint 9002006 Tiger 955i, 2018 Triumph Tiger Sport, 2023 Triumph Tiger 900, XJR1300, 2011 (2009) TDM 900,
Farkles - Laser Duo Techs, MTC Stainless Exhausts, Laser Duo Techs, Power Commander and custom map, Tenere 1200 Handguards, Yamaha Heated Grips, MRA Vario screen, SW Motech Alurack, Givi and Hepco and Becker top boxes, Givi Engine bars, Garmin Zumo XT
#6
-
- Supporting Member(thanks)
-
- 7,057 posts
Sponsored by AutoGlym
- Location:California Berks
- TDM model: 2007
Posted 28 February 2013 - 05:11 pm
I use ProBolt. Never had issues.
My tip is meet them at a Show. I bought bolts for my Tiger and not only did we have some banter but the Senior chap told the Oik to give me a decent discount for being nice.
Cats
#7
-
- Member
-
- 379 posts
Carpe Addict
- Location:Watton, Norfolk
- TDM model: 2003
Posted 28 February 2013 - 05:11 pm
I bought direct from Pro bolt and got the same six screws thing.
There answer is "we don't do the self tapper type screws for the Inner fairing and the advert clearly states the screen kit is sold seperately"
I bought other bits (lots of e'm) direct from Pro bolt at the NEC and they were great, gave me a discount as well.
Edited by Doggy, 28 February 2013 - 05:12 pm.
#8
-
- Root Admin(A)
-
- 19,213 posts
Monkey Boys Monkey
- Location:HELLO ! I'm in the Library...Notts
- TDM model: 1993
Posted 01 March 2013 - 08:34 am
Aaah but, the bolts for the inner fairing are also the bolts for the cowl. Plus, there are 4 bolts holding the mudguard in place. 
Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !! Now owned by chrisbee ! Studley's mk2a Bloggerydoodaah ! Photos of my first MK1 Photos of my MK2a TPLQHCSRSFC No. 1 Fan
#9
-
- Member
-
- 2,199 posts
full o shoite
- Location:Preston, NW England
- TDM model: 2008
Posted 01 March 2013 - 04:31 pm
At least you didn't pay £33!!! http://www.ebay.co.u...=item5653988828
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
