I went to take my bike out today. I turned the key and the voltage meter came on (aftermarket). I went to start it and everything died. Everything.
The battery is fine. There is voltage going to the ignition switch and the switch seemed to test fine (continuity test). The kill switch seemed ok as well.
I'm assuming there is a relay somewhere that is the culprit, but I am stumped. Does any have a Mk1 wiring diagram?
One thing I did notice was the main fuse block had voltage at the main fuse when the key was off. When the key is on, that voltage goes away. The other circuits have no voltage with the key on or off.
Thanks for any help you can provide.