Jump to content


Photo

Repair Water Pump Tdm 900. Report.


  • Please log in to reply
20 replies to this topic

#1 mosquit

mosquit

    discovering Carpe

  • Member
  • 11 posts
  • Location:Russia MoscoW
  • TDM model: 2005

Posted 12 June 2014 - 04:17 pm

Hi to all
I present you a report: how to repair water pump for Yamaha tdm 900.

I apologize in advance for my bad English :)

My problem start here:
http://www.carpe-tdm...9191&hl=mosquit


I found the oil leak, visual inspection and autopsy showed to the pump and pump seals.
I looked the pictures and part numbers but not found the right seals and parts separately.
The pump is only sold assembly, but is not cheap, and wait for the order.

Winter long and snow in Russia, I studied the subject and different forums and topics. Unequivocal answer was nowhere, and I went my experimental way.
I thought it unlikely Yamaha makes different parts to other pumps and I found Kit, this type of Hot Rods Water Pump Repair Kit Yamaha YZ250 99-12:

http://www.ebay.com/...?pt=Motorcycles _Parts_Accessories & Fits = Make% 3AYamaha & hash = item35d12ee256 & vxp = mtr

I looked on my disassembled pump and repair-kit set, all details very similar, and there are all inexpensive, several times cheaper pump assembly. Since all of the parts of set I did not need, then ordered some parts separately.

I need seals (rubber with spring) for bearing seal which seal on the impeller, the bearing itself and all the rubber rings, plus a new gasket for pump.
That's part numbers:
11H-12438-10-00
In a set two seals, one for  the impeller shaft, the second with a spring rubber seal is pressed into the "holder", this is the main parts that I needed.
Also ordered and changed:
Bearing:

93306-00105-00
Oil seal for bearing:
93101-12173-00

3LD-12439-00-00 Gasket pump
93210-33133-00 Gasket ring which stay into the motor carter.
Plus these two rings 93210-21190-00, he also stay on the tube pump.

For clarity, the process spread the video as it is done on a pomp thundercat example, are basically the same parts and the same principle too.

 

Thunderace yzf1000r Water Pump Removal and service part 1  

http://www.youtube.c...h?v=KK2rFU7-hvI

 

Thunderace yzf1000r Water Pump Removal and service part 2 (main part ;)  ) 

http://www.youtube.c...h?v=UIvLbi8ihxk

 

Thunderace water pump service part 3

http://www.youtube.c...h?v=63KWDdMgV-U

 

The most important thing to do everything carefully and do not rush :)
Good luck to everyone. I hope it will be useful to someone.

Will ask questions.

 


Edited by mosquit, 12 June 2014 - 04:27 pm.


#2 mosquit

mosquit

    discovering Carpe

  • Member
  • 11 posts
  • Location:Russia MoscoW
  • TDM model: 2005

Posted 12 June 2014 - 04:25 pm

Special thanks for RolfieB!!! :drinks:

He sent me two used seals :good:  Unfortunately they also had cracks... :sorry:   A new seal is pressed in the holder

:signthankspin: 



#3 RolfieB

RolfieB

    has been here 4ever

  • Member
  • PipPipPipPipPipPipPipPip
  • 1,069 posts
  • Location:Cheltenham
  • TDM model: 2001

Posted 12 June 2014 - 04:59 pm

Glad you got it sorted :badgerrock: . Sorry the seals were of no use. Worth a try.

How're you finding the SuperTen ?


Edited by RolfieB, 12 June 2014 - 04:59 pm.

Now I just fly everywhere.

Be yourself, because everybody else is taken.

 

Gone to new owner.

Black Mk2a

PipeWerx Exhaust, Gold Spots, Goodridge Hoses, Scottoiler,Oil Pressure Indicator, Nippy Normans fuze box,Touratech Handguards,Oxford Heated Grips, Power Socket, Hard Wiring for Sat Nav, Gear Indicator built into the rev counter. Givi E50 Top box & E21 side cases, Bagster Tank Cover & Bag.

 


#4 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 10,735 posts
  • Location:Bootleshire
  • TDM model: 1992

Posted 12 June 2014 - 06:00 pm

Knowledgebase eh chaps, crackin info mosquit, thank you very much  :good:


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead   Gone to Heaven  :sorry: 

 

1991 MK1 in need of some TLC watch this space   :) Sorted and on the Road Mick  :P  :P it's the bike that Jack built  ;) Gone to Heaven  :wub: 

 


#5 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,202 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 12 June 2014 - 06:43 pm

Moved to KB.

 

Nice write up Mosquit !  Thanks for sharing.  :good:


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#6 RSRocket

RSRocket

    900 going for ... 1000cc?

  • Member
  • PipPipPipPipPipPipPipPip
  • 991 posts
  • Location:Harrogate
  • TDM model: 2003

Posted 13 June 2014 - 12:52 am

May well be very useful as the diehards retain their now defunct 9ers , Thanks
24 Hours in a Day, 24 beers in a tray !

"I think the firing orders wrong! : ) "
"I do it with Twins"

Lone Wolf Rider

#7 mosquit

mosquit

    discovering Carpe

  • Member
  • 11 posts
  • Location:Russia MoscoW
  • TDM model: 2005

Posted 13 June 2014 - 04:57 am

RolfieB, What do you mean? ;)  How do I compare ST1200 vs TDM900? :)
What are the pros and cons? Which is better?

 

I try a little bit later to supplement the report.
If I wrote something unclear, correct me please, that was understandable :)


Edited by mosquit, 13 June 2014 - 04:58 am.


#8 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 5,080 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 13 June 2014 - 10:45 am

to put the water seal as it is very fragile, I'll buy these parts to measure and make an alloy drift to fit.

If you have access to an arbour press  it with press it in square. Thank Mosquit for taking the time to research this.


2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, MRA flip screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Titanium brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.<p>Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.

#9 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,202 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 13 June 2014 - 12:50 pm

This fix should also work with 8fiddly water pumps too. :)


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#10 sidestand

sidestand

    Carpe Citizen

  • Member
  • PipPipPipPipPipPipPipPip
  • 3,456 posts
  • Location:Lincolnshire
  • TDM model: 1996

Posted 13 June 2014 - 02:07 pm

They should try doing a Fazer 1000 pump, shouldn't they Studley ???

 

It's up inside the bloody sump !!


post-1-1150550726.gifpost-1-1150559830.gifpost-1-1152402501.jpgThe older I get, the better I was

96 MkII in yellow & silver with bluespots, braided lines, Remus 2 into 1, Hagon rear shock & fork springs, bashplate, heated grips,Motech pannier racks, Road Attacks, Jockoiler, Baglux tank cover & bag. Gone to a far better place - hasn't it Remo?
Another 96 Mk2 in yellow & silver - absolutely standard & pristine ( apart from a butchered rear mudguard - but I'm looking for a new one
'76 Suzuki GT500 Stroker in need of a rebuild
'80 Yamaha XT250 mudplugger
another '81 XT250
'91 BMW R80GS - this one really will do a RTW trip
'05 BMW K1200S - inline four with a shaft
'10 BMW R1200GSA Anniversary Edition
'02 Fazer 1000 - 4 carbs are better than 2 ! - water pump rebuilt by Mr Ramrod Engineering
'00 Triumph Adventurer - Cruiser with a difference - British & a triple
Gary's Bathtub - '99 BMW K1200RS in luvverly pillarbox red . Now been Waspycycled to Nuneaton
And the Latest Addition - a nice BMW G650 XCountry greenlaner - on long term loan to Boy Wonder

1996 Kawasaki KH125 Stroker

2000 TDM Mk2A - nicely Studleyfied - Modified by Masterbrewer, but we've fixed that now !

BMW K1300R

2004 TDM 900 in Silver/Blue - heated grips, MRA vary screen, Wilbers rear shock & engine bars to fit 

BMW S1000XR in white 


#11 RolfieB

RolfieB

    has been here 4ever

  • Member
  • PipPipPipPipPipPipPipPip
  • 1,069 posts
  • Location:Cheltenham
  • TDM model: 2001

Posted 13 June 2014 - 04:43 pm

RolfieB, What do you mean? ;)  How do I compare ST1200 vs TDM900? :)
What are the pros and cons? Which is better?

 

I try a little bit later to supplement the report.
If I wrote something unclear, correct me please, that was understandable :)

Seem to remember in a PM you were looking at an exhaust can for a 1200 Tenere, maybe I got it wrong. Getting old. Deleted messages recently.


Now I just fly everywhere.

Be yourself, because everybody else is taken.

 

Gone to new owner.

Black Mk2a

PipeWerx Exhaust, Gold Spots, Goodridge Hoses, Scottoiler,Oil Pressure Indicator, Nippy Normans fuze box,Touratech Handguards,Oxford Heated Grips, Power Socket, Hard Wiring for Sat Nav, Gear Indicator built into the rev counter. Givi E50 Top box & E21 side cases, Bagster Tank Cover & Bag.

 


#12 Catteeclan

Catteeclan

    full o shoite

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 2,433 posts
  • Location:Gorleston Norfolk
  • TDM model: 2002

Posted 13 June 2014 - 07:00 pm

Seem to remember in a PM you were looking at an exhaust can for a 1200 Tenere, maybe I got it wrong. Getting old. Deleted messages recently.

 

Think I spotted a remus on ebay if that's any good.


2002 TDM900 Yellow


#13 mosquit

mosquit

    discovering Carpe

  • Member
  • 11 posts
  • Location:Russia MoscoW
  • TDM model: 2005

Posted 15 June 2014 - 10:00 am

Add a bit of information with picture.
 

104947591.jpg
 

4. Water pump seal set11H-12438-10-00. In this set also position 9 & 8, if I remember correctly the rubber ring is installed on the holder. Picture of this set below.

 

19217-611-000.jpg

I think this set is universal for many Yamaha models.

 

5. Bearing: 93306-00105-00

6. Oil seal: 93101-12173-00

10. Gasket pump: 3LD-12439-00-00.  This also applies to TDM850, TRX850 and XTZ750


Edited by mosquit, 15 June 2014 - 10:01 am.


#14 mosquit

mosquit

    discovering Carpe

  • Member
  • 11 posts
  • Location:Russia MoscoW
  • TDM model: 2005

Posted 15 June 2014 - 10:14 am

107600604.jpg

№ 2. 3LD-12439-00-00 Gasket pump

№ 7. 93210-33133-00

№ 14. 93210-21190-00 (two pieces)



#15 mosquit

mosquit

    discovering Carpe

  • Member
  • 11 posts
  • Location:Russia MoscoW
  • TDM model: 2005

Posted 15 June 2014 - 10:41 am

Seem to remember in a PM you were looking at an exhaust can for a 1200 Tenere, maybe I got it wrong. Getting old. Deleted messages recently.

Yes that's right. I moved from TDM900 to the Super Ténéré 1200. I love this bike. This is another motorcycle it does not compare with TDM, they are different.
ST is large and comfortable travel enduro, it's heavy weight, motor with vibrations and noisy, but after TDM its normal and habitually. At first time I wanted to BMW R1200GS, but the choice is made in the direction of Yamaha again. I think Japanese motorcycles more reliable.
Traveled from Russia to Georgia in May on it. All I like about him. Unfortunately crashed on supertenere and Parts wait until I go back to TDM. To be honest, it is very unusual after ST ride on TDM.
This is another bike and has its own pros and cons. But I'm happy with it.
I think this can be discussed in another topic, if you're interested;)

Me and my bike at the pass in Georgia

107309462.jpg


Edited by mosquit, 15 June 2014 - 10:44 am.


#16 anda3243

anda3243

    really likes Carpe

  • Member
  • 89 posts
  • Location:Stockholm
  • TDM model: 1999

Posted 14 July 2014 - 09:40 pm

This fix should also work with 8fiddly water pumps too. :)


Exactly, this should also applicable on tom 850 pumps. One can change the 900 pump to a 850 water pump. All relevant dimensions and bolt pattern are the same, only the color and appearance features differs.

#17 Mxroost

Mxroost

    arrived on last train

  • Member
  • 3 posts
  • TDM model: 1992

Posted 29 June 2023 - 12:58 am

So Im restoring a92 tdm 850 and Im trying to remove the water pump assy, still waiting on a Haynes shop manual. Ive ordered all the seals and o-rings. Got all the bolts out of the pump. Can I tap the assembly off from the other side or do I have to do more engine disassembly? I dont think I have to but you never know🥴

#18 MArk2

MArk2

    seems to like Carpe

  • Supporting Member(thanks)
  • 70 posts
  • Location:leicester
  • TDM model: 2004

Posted 30 June 2023 - 10:43 am

Dont drop the thrust washer into the sump when pull it off. No need to ask how i know. Mark.



#19 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,202 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 30 June 2023 - 03:15 pm

So Im restoring a92 tdm 850 and Im trying to remove the water pump assy, still waiting on a Haynes shop manual. Ive ordered all the seals and o-rings. Got all the bolts out of the pump. Can I tap the assembly off from the other side or do I have to do more engine disassembly? I dont think I have to but you never know

From memory, I gently levered mine out.


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#20 Mxroost

Mxroost

    arrived on last train

  • Member
  • 3 posts
  • TDM model: 1992

Posted 01 July 2023 - 06:49 am

Thank you gents for the info on the water pump removal. Ill definitely be careful with the thrust washer. I tried the gentle pry method but wouldnt budge. The bike has been sitting since 1994 so shes reluctant to let parts go. The redeeming value is the bike only has 10k miles on the clock.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users