While putting the toys to bed (02:00 Wednesday), I noticed that the number plate lamp was flashing and only lit on one side.
Looks like this https://www.ebay.co....tm/372681628526 (but not that ££££) - dunno if KEDO still do em.
Investigation/repair this morning....
Unit removed and opened
3/5 White LEDs not working lazy so an so's
After determining the problem with MMeter I decided that dismounting the offending part and replacing the busted resistor wasn't worth the effort.
I cut a 6 LED piece from one of the LED strips I use to light the shed. I soldered a couple of wires to the strip and glued into position on the light unit. Soldered the wires to appropriate poles and we have light. A mask off and quick coat of black gloss to prevent some unwanted white light showing.
Assemble followed by carroty cake and tea as reward.