Losing My Bearings
#1
Posted 28 May 2020 - 05:35 pm
I have a mk2 tdm without the fuel gauge from year 98.
My sprocket carrier bearing went and minced my rear wheel.
I am purchasing a set of new wheels tomorrow but when i look for bearing kits I keep seeing 4 listed.
Is this correct?
Does the tdm have 4 bearings in the rear wheel setup?
Im sure it was 3 and the book my mate has says 3 so im unsure now.
Any light on the matter would be fantastic 💡👍
#2
Posted 28 May 2020 - 06:17 pm
#3
Posted 28 May 2020 - 06:59 pm
Correct, you need four bearings one for the sprocket carrier..
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven
1991 MK1 in need of some TLC watch this space Sorted and on the Road Mick it's the bike that Jack built Gone to Heaven
#4
Posted 28 May 2020 - 07:46 pm
My sprocket carrier bearing went and minced my rear wheel.
Are you sure it's not a 9'er?
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#5
Posted 28 May 2020 - 09:10 pm
Single-handedly reviving the Wave.
2008 reg. Black TDM 900 ABS
#6
Posted 28 May 2020 - 09:27 pm
Are you sure it's not a 9'er?
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#7
Posted 28 May 2020 - 09:40 pm
I wouldn't have noticed if i didn't hear the sprocket nuts catching on the swing arm.
A week ago the wheel was fine no play at all but it obviously wasnt fine underneath 😭
#8
Posted 29 May 2020 - 06:34 am
Not happened to the 9r far as i'm aware, the referance was to "mincing" cos 9r riders is efeminate, i'm okay now as back to a mk1
Check the bearing area inside the sprocket carrier it may have worn some over time, if it's bad replace otherwise use some loctite on the new bearing, it's happened a few times, mainly due to age me thinks.
Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.
Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead Gone to Heaven
1991 MK1 in need of some TLC watch this space Sorted and on the Road Mick it's the bike that Jack built Gone to Heaven
#9
Posted 29 May 2020 - 07:51 am
Remember in the sprocket carrier there is a reduction collar in the bearing that appears in some cases to be part of the bearing it's not so be careful
For a challenging summer try the
Round Britain Rally.....
1993 TDM 850 Mk1 ..... 2008 TDM 900 .... 1975, 1979, 1982, 1992 Goldwings, Scott, AJS, Triumph 5TA
#10
Posted 29 May 2020 - 09:53 am
Not happened to the 9r far as i'm aware, the referance was to "mincing" cos 9r riders is efeminate, i'm okay now as back to a mk1
Check the bearing area inside the sprocket carrier it may have worn some over time, if it's bad replace otherwise use some loctite on the new bearing, it's happened a few times, mainly due to age me thinks.
yes it does happen to TDM900's most loikely jew to pressure washing / steam cleaning
Remember in the sprocket carrier there is a reduction collar in the bearing that appears in some cases to be part of the bearing it's not so be careful
bleddy good tip there Rally as that fooled me once afore.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#11
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users