These should also fit 3VD years too.
20181025_155003.jpg 72.11KB 2 downloads 20181025_155013.jpg 63.88KB 1 downloads 20181025_155203.jpg 58.46KB 1 downloads 20181025_155230.jpg 165.07KB 1 downloads 20181025_155255.jpg 178.63KB 1 downloads 20181025_155417.jpg 66.71KB 1 downloads
20181025_170336.jpg 118.47KB 0 downloads
20181025_170419.jpg 92.45KB 0 downloads
20181025_170405.jpg 120.31KB 0 downloads
Frames detached - 2 minute job
20181025_170506.jpg 111.25KB 0 downloads
Tidy up caps in place - very neat
20181025_170708.jpg 114.57KB 0 downloads
20181025_172122.jpg 131.51KB 0 downloads
Overall impression without long term use..very well made..very sturdy despite quick release mechanism...very neat looking bike when not touring...doddle to install - about 3 hours including initial weighing up the job. Bike at handlebars just under 800mm, with E21's on 870mm....
Bad points, the adapter top case mount i.e. the main lock is mounted to the frame via 2 x Allen bolts. Anybody with a 6mm key could remove the luggage. I may install some anti tamper or shear bolts.
The E21's are a bit pliable which means they flex on the back wall stopping me from push clicking them on and then once on they don't release from the push button for the same reason. No big deal,just open the case and operate the lock by thumb. Sturdier cases should be fine..maximum weight label for the frames including pannier 12.5kg..
Hope that luggage option is useful to someone...
Cost and part numbers 20181025_185027.jpg 77.4KB 0 downloads
Edited by Apache, 25 October 2018 - 05:51 pm.