Jump to content


Photo
- - - - -

More Mk 1 Bits


  • Please log in to reply
20 replies to this topic

#1 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 17 January 2019 - 04:32 pm

Tidying up the loft this time and have found a load more Mk1 bits if anyone's after anything.

 

  • Nosecone looks to have had a repair at the bottom left of the screen, back left mounting lug is broken, and it's been painted matt black
  • 2 side panels in reasonable condition, looks like one has had a repair around one of the bolt holes, and there's a few scratches
  • Rear faring with light housing
  • Under-tray/number-plate hanger thingie
  • Clutch cable
  • Rear brake master cylinder
  • Gear lever
  • Starter relay and cable
  • Swing arm pivot
  • Rear wheel adjusters, both blocks but only 1 plate
  • Speedo cable
  • Both yokes
  • Stop switch
  • Reg/Rec (looks like an aftermarket not an original to me but not 100% sure)
  • Battery box
  • Thermostat and housing
  • Some random vacuum and drain pipes
  • Coolant tank
  • Crank case breather hose (I think, the one by the thermostat housing in the pic)
  • 1 ally bracket, think it's the rear caliper mount

klmt6ot.jpg

 

pWIDxyW.jpg


Edited by ChrisG, 17 January 2019 - 04:44 pm.

1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#2 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,202 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 18 January 2019 - 10:42 am

wouldnt mind the side and rear plastics please Chris.


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#3 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 18 January 2019 - 04:13 pm

I hope you haven't damaged your Mk1  :huh:  :punishment:

 

No idea what faring bits are worth so assuming I can post it for under a tenner shall we go with the same payment method as last time? It might be a couple of weeks before I can post it out though.

 

 

 

 

 

 

If you're thinking of painting bits to match your bike I just found the paint code for it too  :lol:

 

KZWTMuI.jpg?1


Edited by ChrisG, 18 January 2019 - 04:14 pm.

1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#4 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,202 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 19 January 2019 - 10:00 am

Yeah, no, errr yeah. :lol:   I haven't damaged the bike, it was already done for me. lol  I don't like the white bits on my plastics and the rear panel has a broken/missing tang.

 

Yep, very happy to donate to a worthy cause, prolly be Help for Heroes this time. Also happy to cover the postage costs. No rush to get them mate. :good:


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#5 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 10,735 posts
  • Location:Bootleshire
  • TDM model: 1992

Posted 19 January 2019 - 10:43 am

Chris i'll grab the starter relay and adjusters please.


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead   Gone to Heaven  :sorry: 

 

1991 MK1 in need of some TLC watch this space   :) Sorted and on the Road Mick  :P  :P it's the bike that Jack built  ;) Gone to Heaven  :wub: 

 


#6 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 19 January 2019 - 12:24 pm

Yeah, I never saw the point in those white bits either :D

Dablik, pm me your address and I'll go hunting for a jiffy bag.

1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#7 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 10,735 posts
  • Location:Bootleshire
  • TDM model: 1992

Posted 19 January 2019 - 10:21 pm

Cheers mucka :good:


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead   Gone to Heaven  :sorry: 

 

1991 MK1 in need of some TLC watch this space   :) Sorted and on the Road Mick  :P  :P it's the bike that Jack built  ;) Gone to Heaven  :wub: 

 


#8 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 21 January 2019 - 11:26 am

Found the bits but didn't make it to the post office so will probably get them out to you both next weekend. 


Edited by ChrisG, 21 January 2019 - 11:27 am.

1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#9 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 10,735 posts
  • Location:Bootleshire
  • TDM model: 1992

Posted 21 January 2019 - 01:17 pm

Cheers, whenever you have time, no rush for me.


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead   Gone to Heaven  :sorry: 

 

1991 MK1 in need of some TLC watch this space   :) Sorted and on the Road Mick  :P  :P it's the bike that Jack built  ;) Gone to Heaven  :wub: 

 


#10 Studley Ramrod

Studley Ramrod

    Monkey Boys Monkey

  • Root Admin(A)
  • PipPipPipPipPipPipPipPip
  • 19,202 posts
  • Location:HELLO ! I'm in the Library...Notts
  • TDM model: 1993

Posted 21 January 2019 - 08:33 pm

:wifgeni:


Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !!  Now owned by chrisbee !   Studley's mk2a Bloggerydoodaah !  Photos of my first MK1  Photos of my MK2a  TPLQHCSRSFC No. 1 Fan


#11 Coxylaad

Coxylaad

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 509 posts
  • Location:North East England
  • TDM model: 2002

Posted 20 February 2019 - 12:03 pm

Hi Chris,

     what have you got left of the front fairing?



#12 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 20 February 2019 - 03:49 pm

I've got the main nose cone with screen attached.  Don't believe I've got the inner panel that sits around the instruments though. 

 

I've also got set of headlights and the front cage it all attaches too as well (see earlier for sale post  http://www.carpe-tdm...showtopic=36107, I think the other cage in that post must be the one that holds the radiator)

 

 

 

Probably a fortune to post though, you know anyone who might be interested in transporting from Aldershot?


1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#13 Favs

Favs

    Sir Cumference

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 4,391 posts
  • Location:County Durham
  • TDM model: 2008

Posted 20 February 2019 - 05:57 pm

I've got the main nose cone with screen attached.  Don't believe I've got the inner panel that sits around the instruments though. 

 

I've also got set of headlights and the front cage it all attaches too as well (see earlier for sale post  http://www.carpe-tdm...showtopic=36107, I think the other cage in that post must be the one that holds the radiator)

 

 

 

Probably a fortune to post though, you know anyone who might be interested in transporting from Aldershot?

I'll be in Farnborough in a couple of weeks and can call around for them Chris. I can transport to NE England for Coxylad. If SR hasn't got his bits yet, I can collect and deliver those on my way past when I return to Co. Durham.


Single-handedly reviving the Wave.

 

2008 reg. Black TDM 900 ABS

 

 

 


#14 Catteeclan

Catteeclan

    full o shoite

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 2,433 posts
  • Location:Gorleston Norfolk
  • TDM model: 2002

Posted 20 February 2019 - 07:28 pm

I have a lower side panel in the shed, Cann't remember which side but free if anyone's interested.


2002 TDM900 Yellow


#15 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 21 February 2019 - 08:04 am

I'll be in Farnborough in a couple of weeks and can call around for them Chris. I can transport to NE England for Coxylad. If SR hasn't got his bits yet, I can collect and deliver those on my way past when I return to Co. Durham.

 

That could well be doable if Coxy wants them.   :good:


1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#16 Coxylaad

Coxylaad

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 509 posts
  • Location:North East England
  • TDM model: 2002

Posted 04 March 2019 - 10:50 am

definitely interested. I would like to see how it all looks. 



#17 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 04 March 2019 - 04:03 pm

Looking at your build thread I assume you're not in a massive hurry as it looks like there's still a fair bit to do? 

 

I'm not home for the next couple for weeks to dig them out, I'm guessing that'll have missed Favs transport opportunity. 

 

Don't suppose you're likely to be down south at any point?  If not I'll measure it up and see what postage costs might be like,


1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif


#18 Favs

Favs

    Sir Cumference

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 4,391 posts
  • Location:County Durham
  • TDM model: 2008

Posted 04 March 2019 - 05:08 pm

Won't be down until after next week (cherry-picker transplanting) - as in a week Friday at the earliest. Transport still possible.


Single-handedly reviving the Wave.

 

2008 reg. Black TDM 900 ABS

 

 

 


#19 Coxylaad

Coxylaad

    Knight of Postsalot

  • Member
  • PipPipPipPipPip
  • 509 posts
  • Location:North East England
  • TDM model: 2002

Posted 03 April 2019 - 01:32 pm

any update on this? I would be interested to see what I can do with a 9er/mk1 hybrid setup



#20 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,275 posts
  • Location:Netherlands
  • TDM model: 2009

Posted 03 April 2019 - 02:22 pm

I've definitely got the nose cone and screen part of the faring, along with a set of lights and I'm pretty sure I've got the metal bracket bit that it all mounts to.  I'm not home until 13/14th to dig it out though so hopefully you're not in a rush?


1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgpost-1-1150550726.gifpost-1-1150559830.gif



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users