Jump to content


Photo
- - - - -

Finally It's Here.


  • Please log in to reply
14 replies to this topic

#1 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,613 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 13 February 2020 - 05:39 pm

I have been waiting for this D1:3 camlock, ER40 collet chuck since last June. Fits perfectly and runs true within less than 0.01mm, so low even my fancy clock can just see it.
Like a dog with two tails now.

Attached Files


2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.
BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, Givi tall screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Stainless brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.

Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.

Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.


#2 Snowbird

Snowbird

    Carpe Regular

  • Supporting Member(thanks)
  • Pip
  • 139 posts
  • Location:Often on another planet, but mostly south Cambs.
  • TDM model: 2000

Posted 13 February 2020 - 06:03 pm

More TDM bling coming soon then?


Current toys: '99 XT600E, 2000 4TX, '82 Princess 30DS (where the username comes from), No longer a '03 Fazer thou.

Save the planet, it's the only one with beer!


#3 ChrisG

ChrisG

    Resident vulture

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 7,989 posts
  • Location:Aldershot
  • TDM model: 2009

Posted 13 February 2020 - 06:43 pm

Just as well you retired so you've got time to play  :lol:


1992 Mk1, 76k miles, Hagon springs, MTC exhaust, 4½ gears Gone now :(
2009 900 abs, 42k miles, Yamaha heated grips, double bubble screen, R&G crash bungs, scottoiler, Autocom, 1500 lumen LED spotlights.

post-1-1152402501.jpgeyesbloodshot.gifpost-1-1150550726.gifflame.gifpost-1-1150559830.gifautocom-logo-small.gif

#4 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,613 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 13 February 2020 - 07:58 pm

The master engineer made one out of mild steel as he got tired of waiting, which I've been using, but it's started to wear out being a bit soft.

This one is hardened and ground. Not only TDM bling, but Royal Enfield bling too.  :)

So I'm all set up now, until I shuffle off.


2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.
BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, Givi tall screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Stainless brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.

Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.

Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.


#5 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,571 posts
  • Location:Bootleshire
  • TDM model: 1991

Posted 13 February 2020 - 10:19 pm

Lovley, what you making Brass bits for Lee.


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead

 

1991 MK1 in need of some TLC watch this space  :) Sorted and on the Road Mick :P :P it's the bike that Jack built ;)


#6 wicklamulla

wicklamulla

    is it Jizzy Rascal time yet.....?

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 11,665 posts
  • Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
  • TDM model: 1999

Posted 13 February 2020 - 11:09 pm

Lovley, what you making Brass bits for Lee.

monkey's balls.


spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.

I loike tay and hang sangwiches !

www.kenhogantreeservices.co.uk

http://s33.photobuck...77/wickla/?sc=6



http://reg.imageshack.us/v_images.php

post-1-1150550733.gifpost-1-1150550726.gifpost-1-1150559830.gif


#7 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,613 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 14 February 2020 - 09:06 am

Brass pipe plug for Lister CS/6,hex head will be milled on dividing head as owner wants it to be Whitworth sized.

monkey's balls.


Actually I do have a Ball turner

2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.
BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, Givi tall screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Stainless brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.

Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.

Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.


#8 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,571 posts
  • Location:Bootleshire
  • TDM model: 1991

Posted 14 February 2020 - 01:01 pm

Brass pipe plug for Lister CS/6,hex head will be milled on dividing head as owner wants it to be Whitworth sized.

Actually I do have a Ball turner

Go easy with it..


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead

 

1991 MK1 in need of some TLC watch this space  :) Sorted and on the Road Mick :P :P it's the bike that Jack built ;)


#9 tr7dan

tr7dan

    Carpe Regular

  • Member
  • Pip
  • 106 posts
  • TDM model: 2006

Posted 15 February 2020 - 09:41 am

Accurate to 0.01mm you say ? Sorry, that's never gonna work on a Enfield.....

 

:lol:



#10 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,613 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 15 February 2020 - 08:54 pm

Take the RE wheel spacers for example supposed to be bored 17.00 mm. 17.36 one end 17.64 the other and ends not parallel to each other and the bore skewed not centred. Made my own.

Quite a few bits have been binned and I got a bucket of substandard nuts and bolts, primary and drive chains, bearings etc, the list is long, but it's been fun.


2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.
BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, Givi tall screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Stainless brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.

Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.

Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.


#11 Snowbird

Snowbird

    Carpe Regular

  • Supporting Member(thanks)
  • Pip
  • 139 posts
  • Location:Often on another planet, but mostly south Cambs.
  • TDM model: 2000

Posted 16 February 2020 - 01:22 am

I work for an aero engine company ( old lawnmower tech not jets) and if a crankshaft is below limits we do a .003" undersize in a lathe with emery tape, we used to do .006" the same way but now they are supposed to be sent away for that one and re-nitrided, the reason being most in the game have equipment to vauge to grind any less, it's a soul destroying job having to check for ovality and paralel as you go with a micrometer.

I one had to do a 6 pot crank on the ends because of a few small corrosion pits from a very good standard size, two days later I had lost the will to live, never regained the will to live till I got a TDM.


Current toys: '99 XT600E, 2000 4TX, '82 Princess 30DS (where the username comes from), No longer a '03 Fazer thou.

Save the planet, it's the only one with beer!


#12 drewpy

drewpy

    850 going for 900

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 883 posts
  • Location:Manchester UK
  • TDM model: 1996

Posted 16 February 2020 - 03:32 pm

Cool, more things to make

"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"

Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs,  fenda extenda, silicone airbox connectors, 15w fork oil, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, USB, 4 way fused accessory Bus, R6 electric fuel pump (5EB, kept seizing), 17" 3CV front wheel, Michellin R5 tyres, EXUP speedo.


#13 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,613 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 16 February 2020 - 05:55 pm

I had a Honda VFR apart once. They now use special lobed screws like a zip bolt which kind of cuts it's own thread, no proper tapped threads at all. It was hell taking it to bits.
So an M6 screw has a M4 shank. Moose sheared heads of every other one trying to put them back. The Helicoil stock got depleted that day.

Edited by leehenty, 16 February 2020 - 05:55 pm.

2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.
BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, Givi tall screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Stainless brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.

Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.

Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.


#14 dablik

dablik

    Master Intermediate Fettlin' Award 2018

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 8,571 posts
  • Location:Bootleshire
  • TDM model: 1991

Posted 16 February 2020 - 09:23 pm

Oh he kept that part quiet he did, about shearing the bolts :lol:


Bigred mk1 R1 Calipers- Braided lines- Givi wing rack-Crash bungs- Hi vis bullets-PR2's- and a hoot to ride.

Quad 900 Silver Laser duo tech pipes-Scott oiler-Engine crash bars- Radiator mounted see me ring LED's-Datatool system 3 alarm -Centre stand- Extender fender-Renthal bars-Handle bar risers-Mirror extenders-BMW GS Handgaurds-Acumen uprated horn & Nautilus-Stainless steel Radiator guard-Givi wing rack-OEM screen-Yammy touring screen-MRA Vario-MRA Double bubble cut down for fast as fk riding-Tiger screen-Tank protector-Stomp grip panels-Optimate lead

 

1991 MK1 in need of some TLC watch this space  :) Sorted and on the Road Mick :P :P it's the bike that Jack built ;)


#15 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,613 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 18 February 2020 - 04:49 pm

It was ok he left with lots more stainless than he arrived with, had to do all of the cover bolts in the end or it would have looned wrong.

2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.
BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, Givi tall screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Stainless brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.

Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.

Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users