Jump to content


Photo
- - - - -

Remap Advice


  • Please log in to reply
1 reply to this topic

#1 Jim55

Jim55

    seems to like Carpe

  • Member
  • 41 posts
  • TDM model: 2007

Posted 09 October 2021 - 07:00 pm

Does anyone know who can remap my 07 niner,IV fitted black widow cans ,it sounds amazing but I'm sure it's a bit lean and lost a few horses ( Scotland preferably but I would travel to a tdm specialist) thanks😎

#2 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 4,201 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 10 October 2021 - 11:26 am

Hi Jim , I had mine done by Samios Motorsport in Greece, which meant sending it away.

It seems now that only a small number of versions of ECU. mostly the early ones without an Immobiliser or ABS can be programmed.

 

Where in Scotland are you ? I'm about 15 miles west of Edinburgh, you're welcome to try the ECU on your bike, but if it has either of the above features then i dont think it will work.

 

To find out if yours can be programmed you will need to send a photo of the label on the ECU to Samios, who then look through their ECU reference books to see if it's possible.

 

Prior to the remap I had done the airbox mod, and fitted a resistor in series with the airbox temperature sensor, and advanced the ignition timing by 3 or 4 degrees (by using a dremel to slot the crank position sensor mounting bracket screw holes)

 

I also run a -1 tooth front sprocket which I think on it's own makes the gears more useful, at the slight of expense of using a tad more fuel


900 with better bits. Owes me nothing, Makes me smile



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users