Jump to content


Photo
- - - - -

Water Pipe O Ring


  • Please log in to reply
5 replies to this topic

#1 leehenty

leehenty

    Backstreet Mechanikin'

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 5,080 posts
  • Location:Rushden Northamptonshire.
  • TDM model: 2002

Posted 30 April 2015 - 10:03 am

The O ring that seals the water pipe into the top of the cylinder head on a niner is a funny size. Careful measuring of a genuine Yamaha one that cost a ridiculous £5+ revealed it to be a BS617 O ring. 17.86mm x 2.62 cs. So Jap bike has an imperial sized o ring in it.

I now have 50 of these in nitrile 70 shore so any one who needs one get in touch.
2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, MRA flip screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, BikeVis bullet LED's under front  nose,Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Titanium brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins Adventure Spec Tool tube under rear rack, left and right sides with custom alloy mounts.<p>Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.

#2 Luke

Luke

    Carpe groupie

  • Member
  • PipPip
  • 271 posts
  • Location:Staffordshire
  • TDM model: 2002

Posted 30 April 2015 - 11:57 am

Hi Lee, I'll put my hand up for one. Just in case there is a mad rush!
Fuel Cans, PCIII USB, Oxford Heated Grips, K&N Air Filter, Air Box Mod, Michelin Pilot Road 3, MRA Vario Screen, Scotoiler HRC, Givi Wingrack, Givi E52 Maxia Top Box, Givi E41 Panniers, Hagon Progressive Forks, Centre Stand, Bagster Tank Cover + Bags

#3 TDMTAM

TDMTAM

    Carpe Citizen

  • Member
  • PipPipPipPipPipPipPipPip
  • 4,205 posts
  • Location:Glasgow, Scotland
  • TDM model: 2008

Posted 30 April 2015 - 01:40 pm

That would be great Lee, as I am hoping to do my clearances later this year.
Let us know how much etc etc

Tam
2008 TDM 900 in BLACK, MRA Vario, DL handguards & more to come
1994 TDM 850 mkI Silver, with Blueflame end can, Gone to a new owner & I kinda miss her!

th_09062006104.jpg th_02012009095.jpg

Only a Biker knows why a Dog sticks it head out the car window

#4 CharlieMac

CharlieMac

    sticking around

  • Member
  • 37 posts
  • Location:Stourbridge, W. Mids.
  • TDM model: 2009

Posted 17 October 2019 - 05:44 pm

I'll have one of them please Lee, as well as the fitting kit for the CSM. PM me with details of how to pay for them if you would.
Cheers,
Chas

#5 wicklamulla

wicklamulla

    is it Jizzy Rascal time yet.....?

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 12,211 posts
  • Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
  • TDM model: 1999

Posted 17 October 2019 - 07:12 pm

I'll have one of them please Lee, as well as the fitting kit for the CSM. PM me with details of how to pay for them if you would.
Cheers,
Chas

  Chas,  ya may need to Private Message Lee.


spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.

I loike tay and hang sangwiches !

www.kenhogantreeservices.co.uk

http://s33.photobuck...77/wickla/?sc=6



http://reg.imageshack.us/v_images.php

post-1-1150550733.gifpost-1-1150550726.gifpost-1-1150559830.gif


#6 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 4,667 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 20 October 2019 - 09:45 am

10 for £1.50  http://www.turbonoz....ORNITBS617.html

#

 

Also here https://www.lsengine...ile-70-sha.html


Edited by fixitsan, 20 October 2019 - 09:48 am.

900 with better bits. Owes me nothing, Makes me smile



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users