Can I Replace Starship On A Mk2 Exhaust
#1
Posted 22 April 2012 - 07:35 am
Thanks
APW
Have you ever lent someone 20 quid and never seen it again? It was probably worth it.
Long Loved TDM is no longer with me...
#2
Posted 22 April 2012 - 09:24 am
sure it's possible, but it would need to be custom made.
As I prepared some pix of a good original set of pipes (AKA USS Enterprise) recently, I'll share them here to help you. Note that it is not identical on both sides.
I'm running a Lazer Y-piece and cans... fruity and great improvement of low down torque. Include the drawing of that too...
You can see the Y-piece is two small mufflers too, not just a couple of pipes joined.
PS I have this set, in great condition, for sale (in Australia).
Starship Enterprise (three shots)
Lazer ProStock
MotoBloke
www.ShineMyBike.com
Sinny, Ostraya
98 TDM850L 4TX series aka Mk2a 146000km
Tiger screen; Laser ProStock exhaust; large old Givi topbox; ProTaper ATV 'bars; BarkBusters with Storm guards; CoyoteMoto crash knobs; Aldi GoCruise GPS; Michelin Pilot Road 3 tyres.
Previous loves:
Suzuki DL650 V-Strom K6; Honda XL600VH Transalp X 2; Suzuki GS500; Yam XTZ750 Super Tenere; Yam FJ1200U; MotoGuzzi V65 Lario; Kawa KLR600; Honda XL350 RF.
,
#3
Posted 22 April 2012 - 01:35 pm
Could always try fixing it, My dad did a cracking job welding mine up.
http://www.carpe-tdm...e Is this post
After
My dad would like to mention he was only using a crappy welder and the metal in places was that bad as he was welding it was just burning right though. Hence the quality of the job.
Edited by LewisBlackburn, 22 April 2012 - 01:47 pm.
#4
Posted 23 April 2012 - 12:41 am
by the way, Mk 1 and Mk 2 exhausts are fully interchangeable (ie; all the 850s). The only difference from model to model is some are not chrome-plated. The Lazer ProStock pipes I am running on my 1998 Mk2a (4TX) are from a wrecked 1992 Mk1 (3VD) model.
MotoBloke
www.ShineMyBike.com
Sinny, Ostraya
98 TDM850L 4TX series aka Mk2a 146000km
Tiger screen; Laser ProStock exhaust; large old Givi topbox; ProTaper ATV 'bars; BarkBusters with Storm guards; CoyoteMoto crash knobs; Aldi GoCruise GPS; Michelin Pilot Road 3 tyres.
Previous loves:
Suzuki DL650 V-Strom K6; Honda XL600VH Transalp X 2; Suzuki GS500; Yam XTZ750 Super Tenere; Yam FJ1200U; MotoGuzzi V65 Lario; Kawa KLR600; Honda XL350 RF.
,
#5
Posted 24 April 2012 - 07:25 pm
Another thing that occured to me is why not join the downpipe 2->1 onto just ONE of the two cans and remove the other one? It reduces the weight and if the downpipe 2->1 is the bottleneck then maybe the one can has enough volume to flow the gases? Any engineers out there?
APW
Edited by apw99, 24 April 2012 - 07:25 pm.
Have you ever lent someone 20 quid and never seen it again? It was probably worth it.
Long Loved TDM is no longer with me...
#6
Posted 24 April 2012 - 08:13 pm
Not sure what parts of your " starship" are damaged but I have one that I removed from my 98 Mk 2. The inlet pipe is rotten and the can ends seem to have been filled with gungum at some stage but otherwise the box is solid and might get you out of a hole for a while. See pics.
Also pictured is a Nexxus system that I bought unseen which turned out to be useless ( down pipes crushed and end cans badly scratched) the only usable bit is this bit in the middle.
I have fitted a second hand 2 into 1 onto mine and doubt if ill be changing back so if any of the above is any use to you let me know and its yours... FOC...
#7
Posted 25 April 2012 - 06:24 am
Not sure what parts of your " starship" are damaged but I have one that I removed from my 98 Mk 2. The inlet pipe is rotten and the can ends seem to have been filled with gungum at some stage but otherwise the box is solid and might get you out of a hole for a while. See pics.
Also pictured is a Nexxus system that I bought unseen which turned out to be useless ( down pipes crushed and end cans badly scratched) the only usable bit is this bit in the middle.
I have fitted a second hand 2 into 1 onto mine and doubt if ill be changing back so if any of the above is any use to you let me know and its yours... FOC...
Many thanks!
I might well take you up on that. My exhaust is just starting to 'burble' so it may be a while before I need to go at it, but I will certainly keep that parts stash in mind!
Cheers
Have you ever lent someone 20 quid and never seen it again? It was probably worth it.
Long Loved TDM is no longer with me...
#8
Posted 25 April 2012 - 06:43 am
Any chance I could have this if Alex doesn't want it?
Cheers, Chris (G)
#9
Posted 25 April 2012 - 07:00 am
Its yours if Alex doesn't want...
will try get more pics today..
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users