Found this on the ground...
Is This Bugger An Mki Part?
#1
Posted 28 May 2020 - 03:56 pm
Found this on the ground...
#2
Posted 28 May 2020 - 04:00 pm
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#3
Posted 28 May 2020 - 04:28 pm
#4
Posted 28 May 2020 - 04:35 pm
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#5
Posted 28 May 2020 - 05:16 pm
i thought a givi bung to go in the rack on the side. one of mine keeps coming off.
Should be a pointy bit on it too
"As I Lay Rubber down to street, I pray for traction I can keep. But if I skid and begin to slide, please dear god protect my ride"
Mods; Oil pressure switch, neoprene rear inner mudguard, scottoiler, highway pegs, fenda extenda, 1999 carbs and airbox, Kais suspension setup, later clutch springs, LED lamps, Metmachex swingarm, Hagon Shock, Oxford heated grips, 4 way fused accessory Bus, 17" 3CV front wheel, Michellin R6 tyres, GPS speedo, 5' ignition advance.
#6
Posted 28 May 2020 - 06:16 pm
..and thinking of it, this one is too big..
#7
Posted 28 May 2020 - 08:25 pm
That son, is a thing of purpose.
Don't recognise is as a mk1 part.
Mk2a 2000 in Silver. Top end Refurb @ 41100 miles, Scottoiler, Renthal Road High Bars, Up & Back Bar Risers, Bellypan, DL650 Handguards, Capt. Picard Bar Ends, House of Henty SS Wheel spacers, New Seat Cover Fitted. 58 MPG !! Now owned by chrisbee ! Studley's mk2a Bloggerydoodaah ! Photos of my first MK1 Photos of my MK2a TPLQHCSRSFC No. 1 Fan
#8
Posted 28 May 2020 - 08:37 pm
#9
Posted 28 May 2020 - 08:59 pm
Single-handedly reviving the Wave.
2008 reg. Black TDM 900 ABS
#10
Posted 28 May 2020 - 09:28 pm
it's a sloice of black forest gateaux.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#11
Posted 29 May 2020 - 05:56 am
Centre stand buffer ?
I'll check that one!
Seat frame bump?
Too small, I believe
it's a sloice of black forest gateaux.
Ok, if No MkI use found I will eat and report if you're right 😁
#12
Posted 29 May 2020 - 06:59 am
If you want to mark your location on the Carpe map: http://www.carpe-tdm...opic.php?t=5117
Doin valve clearances? Use dappers valve shim exchange program and the job will be carroty - Free (other than you postin me yer shims) for sporting members.
Active member of TPLQHCSRSFC and TSRMCMAS (even though a year off) and avid fan of PM not sent.
#13
Posted 29 May 2020 - 08:50 am
Bertie Basset's hat
Single-handedly reviving the Wave.
2008 reg. Black TDM 900 ABS
#14
Posted 29 May 2020 - 09:41 am
ahhhhh it is a TDM 900 riders contraceptive device.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#15
Posted 29 May 2020 - 01:09 pm
Could it be the cap for your smergel paste? Difficult to obtain here but popular in Norway I've heard.
Don't think I have it
Bertie Basset's hat
...but how did that make it into the MkI ? It was the now gone 9er that was brought from GB . . . maybe they have been initmate ?
ahhhhh it is a TDM 900 riders contraceptive device.
Like a P-plug ? ...must be for a very young one, then....
#16
Posted 29 May 2020 - 08:40 pm
Is there a prize for getting the right answer ?
#17
Posted 30 May 2020 - 07:39 am
ahhhhh it is a TDM 900 riders contraceptive device.
Too small and the usual item used is tapered sometimes with bumps.
#18
Posted 30 May 2020 - 08:48 am
3 years ago I made this front yard with a quite steep driveway up to the drivepath
....
....
....
And I found it on the ground next to my MkI 😁😂
Attached Files
Edited by Bjørge, 30 May 2020 - 08:53 am.
#19
Posted 30 May 2020 - 09:10 am
Edited by Gdogg, 30 May 2020 - 09:11 am.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users