As above. Due to a 3rd gear issue and lack of spare parts i've decided to break My TDM. Bit gutted TBH as it was a good looking bike.
08houbihj bhojipk.jpg 385.03KB 1 downloads
link to photos https://photos.app.g...eofuRWNS7zMHju5
Bits with price tags
Ignitech Sparker TCIP4, with plug and play loom for the tdm850 - £50.00 posted
Wiwo Wire / spokd wheels, made to exact same dimensions as stock wheels so bolt right in. Front wheel will need new bearings as i was running a different fork setup (different axle diameter) will need 2 standard front bearings. Power coated in balck with Stainless spokes / nipples. Disks on front are a year old. Rear is original. Wiwo have gone the way of the dinousour and i've not seen another TDM with Wire wheels, these may be the only ones in existance? Think i have about £1000 in theses wheels with the powerdercoatign and new spokes. £500.00 pickup only Peterborough
YSS rear shock. £80.00 posted
Pannier setup £100 local pickup - the frames were for a MK but i modified them to fit the MK2, some brackets could do with a strip and spray. Panniers are top loading units similar to pelicans. Keyed identical with locks.
Open to offers on everything else. If theres something that you need and i've not listed let me know.
Other info i can think of
Bike had about 25K miles on it.
Head looks to be in good condition, did a quick check berofe taking the bike apart and most of the valve clearances were within spec.
Cylinder bores have some light vertical scoring on the front and back of engine. Honing still visible in other places
Crankshaft looks like new. Barely any wear on bearing surfaces that i can see, including big end bearings.
Carbs were rebuilt a couple of years ago.
Frame is dirty but complete, no broken brackets - Swingarm has a dent on one side and rust patches underneath. - will come with plate and V5.
Grab rail was drilled to accept an aluminium Givi monokey (i think) baseplate. Been steady as a rock.
Think the centre stand and engine bars are Sw-motech.
Headlight is modded to run two projector style headlights. They have an electrically operated flap in them to swith between low and high beam
Rear light loom was modified by a previous owner to provide provision for secondary brake light
Main loom was modified by previous to provide power tap- fused
Parts sold so far
Cylinder Head inc cams
Centre stand
Headlight
Engine Bars
Edited by rcmad, 28 August 2019 - 06:59 am.