£50 if anyone wants them
3Cv Carbs
#1
Posted 13 September 2016 - 05:24 pm
£50 if anyone wants them
#2
Posted 13 September 2016 - 08:07 pm
Worth pointing out that the TPS has been butchered and the fitting screws don't appear to be standard.
(They should have a central security nub and are typically well weathered)
#3
Posted 14 September 2016 - 04:44 am
#4
Posted 14 September 2016 - 02:45 pm
I take it these are MK2 carbs jetted for a MK1 and they wont work as MK2s anymore (its MK2s I would be after)Thanks.
#5
Posted 16 September 2016 - 04:17 pm
Edited by wicklamulla, 16 September 2016 - 04:17 pm.
spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.
I loike tay and hang sangwiches !
www.kenhogantreeservices.co.uk
http://s33.photobuck...77/wickla/?sc=6
http://reg.imageshack.us/v_images.php
#7
Posted 23 September 2016 - 11:54 pm
do these share the same "Jet Block Assembly" (part the pilot jet screws into) as the early '92 (3vd) carbs??
If so, I might be interested in them??
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users