Jump to content


Photo
- - - - -

900 Ecu Flash


  • Please log in to reply
18 replies to this topic

#1 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 10 July 2019 - 09:13 am

Has anyone ever got the engine control module flashed on their 900. Mine is 2007 and can't get my hands on a power commander so thinking of getting it flashed instead. Also where would you recommend to get it done, some places you can post them the ECU and they do it and post back. Any advice?

#2 wicklamulla

wicklamulla

    is it Jizzy Rascal time yet.....?

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 11,444 posts
  • Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
  • TDM model: 1999

Posted 10 July 2019 - 10:40 am

how ya.  http://www.carpe-tdm...34683&hl=samios


spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.

I loike tay and hang sangwiches !

www.kenhogantreeservices.co.uk

http://s33.photobuck...77/wickla/?sc=6



http://reg.imageshack.us/v_images.php

post-1-1150550733.gifpost-1-1150550726.gifpost-1-1150559830.gif


#3 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 10 July 2019 - 01:55 pm

Interesting read, cheers. I sent them an email.

#4 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 10 July 2019 - 03:26 pm

I got an email back from them, apparently my ECU is a rare part no. And he hasn't flashed one before. Has anyone with the following ECU got it done:
5PS-8591A-20

#5 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,437 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 10 July 2019 - 05:47 pm

I had mine done. Part number ends -01.

9'er with a 17" front wheel and Samios remap  :)  happy days


#6 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 10 July 2019 - 05:51 pm

Yea the one that ends in 01 is the common one, mine ends in 20 which isn't too common so need to find someone that can do that one.

#7 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,437 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 10 July 2019 - 06:17 pm

Yea the one that ends in 01 is the common one, mine ends in 20 which isn't too common so need to find someone that can do that one.

 

 

I haven't seen many '-01' ones, lots of 02's and 10's though.

 

If you don't have ABS or an immobiliser I think they early 01 ECU would work


9'er with a 17" front wheel and Samios remap  :)  happy days


#8 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 10 July 2019 - 07:21 pm

Mine has abs and an immobiliser, is the ECU coded to the immobiliser? Does getting a flash affect that?

#9 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,437 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 10 July 2019 - 07:31 pm

Mine has abs and an immobiliser, is the ECU coded to the immobiliser? Does getting a flash affect that?

 

The immobiliser has a separate box, coded to the ECU (from what I'm told)....is there a key trasponder too ? I'm Not sure.

 

The ECU can be flashed only in the area of the memory where the maps are stored, the immo code is in a different part of memory and won't be changed by rewriting of the maps


9'er with a 17" front wheel and Samios remap  :)  happy days


#10 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 10 July 2019 - 07:35 pm

Thanks, that's what I thought. Would you recommend a flash over a power commander?

#11 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,437 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 10 July 2019 - 11:37 pm

The 64 gazillion £ question....

Never had a PC but I can imagine it's good points.....but you're still stuck with the standard ignition timing map. An ECU remap let's the tuner open up the benefits of being able to adjust the timing too

9'er with a 17" front wheel and Samios remap  :)  happy days


#12 chrisr

chrisr

    has been here 4ever

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 1,416 posts
  • Location:Surbiton, Surrey
  • TDM model: 2010

Posted 11 July 2019 - 08:29 am

Samios couldnt flash mine either, and using Fixitsans ecu the bike wouldnt start.This is my ecu no.Attached File  3C970DA5-37B6-4516-90FE-9384E6EB0163.jpeg   162.38KB   1 downloads

Edited by chrisr, 11 July 2019 - 08:33 am.

Black.Registered 2013.Scorpion Cans. Renthal 755s, Hyperpro front springs,15w fork oil,DL650 handguards,givi engine bars,led spotlights,gipro gear indicator,lengthened dogbones,LeeHenty CSM kit and stainless bits,Topsellerie seat,Nitron rear shock,MRA vario screen,grip puppies.PC III. K&N airfilter,Fenda extenda,

#13 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 11 July 2019 - 09:07 am

Samios couldnt flash mine either, and using Fixitsans ecu the bike wouldnt start.This is my ecu no. 3C970DA5-37B6-4516-90FE-9384E6EB0163.jpeg

Did you find anyone that could flash yours?

#14 chrisr

chrisr

    has been here 4ever

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 1,416 posts
  • Location:Surbiton, Surrey
  • TDM model: 2010

Posted 11 July 2019 - 09:26 am

No, I had a Powercommander on my previous bike that I swapped over and had remapped, it runs really well now, but so does my previous one without the pc! I may try going back to standard exhausts at some point to see what that does, I rode AliG’s two Tdm’s at the weekend, a 2004 (my old one) and a 2010, both run perfectly with a standard setup.
Black.Registered 2013.Scorpion Cans. Renthal 755s, Hyperpro front springs,15w fork oil,DL650 handguards,givi engine bars,led spotlights,gipro gear indicator,lengthened dogbones,LeeHenty CSM kit and stainless bits,Topsellerie seat,Nitron rear shock,MRA vario screen,grip puppies.PC III. K&N airfilter,Fenda extenda,

#15 wicklamulla

wicklamulla

    is it Jizzy Rascal time yet.....?

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 11,444 posts
  • Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
  • TDM model: 1999

Posted 12 July 2019 - 12:20 am

Samios couldnt flash mine either, and using Fixitsans ecu the bike wouldnt start.This is my ecu no.attachicon.gif 3C970DA5-37B6-4516-90FE-9384E6EB0163.jpeg

 

 

surely it wouldn't start as the Immobiliser and Fixitsans ECU were not compatible,  what ye think?


spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.

I loike tay and hang sangwiches !

www.kenhogantreeservices.co.uk

http://s33.photobuck...77/wickla/?sc=6



http://reg.imageshack.us/v_images.php

post-1-1150550733.gifpost-1-1150550726.gifpost-1-1150559830.gif


#16 chrisr

chrisr

    has been here 4ever

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 1,416 posts
  • Location:Surbiton, Surrey
  • TDM model: 2010

Posted 12 July 2019 - 07:36 am

I think you’re right, but I didn’t want to get in to removing the immobiliser.....if that’s even possible
Black.Registered 2013.Scorpion Cans. Renthal 755s, Hyperpro front springs,15w fork oil,DL650 handguards,givi engine bars,led spotlights,gipro gear indicator,lengthened dogbones,LeeHenty CSM kit and stainless bits,Topsellerie seat,Nitron rear shock,MRA vario screen,grip puppies.PC III. K&N airfilter,Fenda extenda,

#17 wicklamulla

wicklamulla

    is it Jizzy Rascal time yet.....?

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 11,444 posts
  • Location:Parish of Cruwys (pronounced 'Cruise' just loike Tom) Morchard, Mid Devon.
  • TDM model: 1999

Posted 12 July 2019 - 09:00 am

I think you’re right, but I didn’t want to get in to removing the immobiliser.....if that’s even possible

i gotta admit i too would be worried it may be 'tamper proof' and lock out if messed with. I reckon they could be made to communicate and work properly but it's more money and a risk!


spyball alarm/immob, bluespot brake calipers and Stainless hoses, Fournales air adjustable shock with Remote Resevoir, forks raised 10mm thru yokes, racetech linear fork springs in 15 wt oil, Kappa wingrack/luggage, heated grips, Kedo handguards, dual heat controller to power heated jacket liner and or pants!!, Stebel 136DB horn, K&N air filter, colour matched Baglux tank cover (magnetic tank bag modified to fit cover), osram +50% headloight bulbs, headlight protector,"NitramSpecial" parking loight, tail light indicators all running on LED's & incorporate "Lite Buddies", MK7 Scottoiler fitted, taller screen, 2-2 stainless steel CCC's, Devil stainless down pipes. MKI Renntec engine crash bars & sump guard.
engine changed july 2007 on a dyno run it made 79.1BHP / Torque 59.9Had a brief flirtation with a 1999 MKIIa but it blew an exaust valve on the M5 so was sold on to be repaired.

I loike tay and hang sangwiches !

www.kenhogantreeservices.co.uk

http://s33.photobuck...77/wickla/?sc=6



http://reg.imageshack.us/v_images.php

post-1-1150550733.gifpost-1-1150550726.gifpost-1-1150559830.gif


#18 fixitsan

fixitsan

    Carpe Citizen

  • Supporting Member(thanks)
  • PipPipPipPipPipPipPipPip
  • 3,437 posts
  • Location:West Lothian
  • TDM model: 2003

Posted 12 July 2019 - 11:42 am

Be cheaper to fit an earlier and non immobiliser version wiring harness

EG https://rover.ebay.c...tm/293124583064

Edited by fixitsan, 12 July 2019 - 11:45 am.

9'er with a 17" front wheel and Samios remap  :)  happy days


#19 tdmcullen

tdmcullen

    sticking around

  • Member
  • 21 posts
  • TDM model: none yet

Posted 12 July 2019 - 01:03 pm

Anyone ever heard of these? Just came across them. Look similar to a power commander.
https://jetprimeshop...c-cjp-112h.html


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users