So Ive just finished a valve clearance check and a coolant and oil change. Started the bike up and oil is spitting out the small hole on the side of the cylinder. What the hell have I done wrong?
Help! Oil Spitting Out Side Of Cylinder
Started by
Crumb
, Jul 12 2025 03:49 pm
3 replies to this topic
#1
Crumb
-
- Member
- 9 posts
arrived on last train
- Location:Scotland
- TDM model: 2010
Posted 12 July 2025 - 03:49 pm
#2
Crumb
-
- Member
- 9 posts
arrived on last train
- Location:Scotland
- TDM model: 2010
Posted 12 July 2025 - 04:16 pm
#3
leehenty
-
- Supporting Member(thanks)
-
- 5,270 posts
Backstreet Mechanikin'
- Location:Rushden Northamptonshire.
- TDM model: 2002
Posted 13 July 2025 - 06:32 am
Cam cover centre gasket need replacing
Here and here
Here and here
Attached Files
-
IMG_0494.jpeg 139.07KB
0 downloads
2002 900 silver,oil pressure switch with brass 90 degree conversion, RG fork protectors. Wilburs custom made rear Shock with remote hydraulic preload and RG shocktube, Wilburs front springs. Scotoiler with a custom made swing arm delivery unit. Silicone radiator hoses.BMW 1150 handguards with Touratech extensions, Carbon Fibre yoke cover and fender extenda, MRA flip screen, Yamaha Engine bars, SW Motech Centre Stand, Kappa wingrack three box Luggage with E21's as option from the K960 boxes, Zumo 660 satnav on Touratech mount, Led Voltage monitor, Baglux tank cover, Clear LED Rear light, Aux LED brake light, Stainless rear axle nut, stainless chain adjusters, stainless wheel spacers front and rear, Probolt Polished Stainless Flanged Hex engine screws, Polished stainless fairing screws, stainless disc bolts. Titanium brake pins front, Probolt Titanium Flanged Hex Front Caliper Bolts & Rear caliper slide pins.<p>Top Sellerie double gel pad seat. Carbon Fibre inner dash and side infill panels. Anodised black alloy swingarm pivot bolt covers and footpegs, Nano II Gear indicator.
#4
Crumb
-
- Member
- 9 posts
arrived on last train
- Location:Scotland
- TDM model: 2010
Posted 13 July 2025 - 08:49 am
Thanks Lee. After a few hours google research I came to the same conclusion. Well back to strip her down again and get a gasket ordered. Thanks again.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
